Electropolished laser cut framed stencil
Technical Capability Statement
- Stencil thickness 2.0, 3.8, 4.0, 5.0, 6.0, 7.0, 8.0 mils
- Pitch limit 2mils
- Min. aperture size 2mils (on 2mils sheet thickness)
- Min. distance between apertures Same as stencil thickness
- Min. distance between two adjacent Aperture’s wall gap Same as stencil thickness
- Repeatability (Uniformity) +/- 0.1um
- Aspect Ratio ≥ 0.66 ( material thickness )
- Cutting accuracy +/- 5um (over entire print area )
- Positioning Error +/- 4um
- Axial precision +/-10 µm
- Edge roughness < 3 µm
- All opening walls are trapezoidal 0.8 mil Taper? Yes
- 100% inspection, post-manufacture? Yes
Product Comparision Chart
We have capability to manufacture and assemble Single Sided/Layer (SS), Double Sided/Layer (DS-NPTH & DS-PTH) and MultiLayer (up to 32 layers) PCBs with RoHS as an option.
Compare Low Cost Prototype with Standard Prototype and Production. Choose one which
best suits your requirement.
We are one-stop solution provider for all your contract assembly requirements. We have the capability and resources to provide PCB assemblies, as well as cable and harness assemblies.