Whether you need rigid or flexible, single, double or multi-layered PCBs we can help... At QualiEco Circuits we advise on the manufacure and assemble of all types printed circuits board (PCBs)
QualiEco Circuits specialises in smart yet simple PCB solutions – we’re always one step ahead in technology and innovation.
Flelxible PCBs Technical Capabilities
- No. of Layers1 to 4
- Max. PCB size250mmx500mm (Single layer)
250mmx500mm (Double layer)
250mmx250mm (Multi layer)
- Base material and thicknessPolyimide (0.025mm , 0.050mm) or
Polyester (0.076mm, 0.127mm)
- Conductor (Copper-RA or ED)1/3oz, 1/2oz, 1oz
- Coverlay Layer and ThicknessPolyimide (0.025mm), Polyester (0.050mm)
- Stiffener MaterialFR-4, Mylar or Kapton
- Min. hole size (PTH)0.25mm
- Min. hole size (punching)1.0mm
- Aspect ratio – Blind micro via0.5:1
- Min. line width2mil
- Min. trace spacing2mil
- Smallest Aperture10mil
- Min. clearance8mils
- Min. webbing4mils
- Min. pad size0.6mm
- Min. webbing14mils
- Plated gold (gold thickness)1-5u"
- Immersion gold (gold thickness)1-3u"
- Plated tin (tin thickness)4-20u"
- Immersion Tin (tin thickness)1-5u"
- Bend CapabilityMore than 150,000 times
- Insulation resistance1000MW
- Dielectric Strength5KV
Solder Heat Resistance
- Solder Heat Resistance2600C/10secs
Limits and Tolerances
Limits and Tolerances
- Etching +/-0.5mil
- Exposure and alignment +/- 0.05mm (2mil)
- Projection punching +/- 0.025mm (1mil)
- PI film alignment< 0.10mm (4mil)
- Reinforcing and take alignment< 0.1mm (4mil)
- Forming +/- 0.05mm
- Allowable squeeze out per Side0.05mm/mm
- Hard tool Dimensional +/– 0.05mm (2mil)
- Optical Punching Locational +/– 0.05mm (2 mil)
Conductor to Edge of Circuit/Blanking
- Soft Tooling Outline dimensions +/- 0.05" (0.125mm)
- Hard Tooling Outline dimensions +/- 0.003" (0.0254mm)
- ZIF LaserCut Punching Outline dimensions
+/- 0.002" (0.0508mm)
with CpK >2.0
- Differential +/-10%
- Single ended +/-10%
Product Comparison Chart
We have the capability to manufacture and assemble Single Sided/Layer (SS), Double Sided/Layer (DS-NPTH & DS-PTH) and MultiLayer (up to 32 layers) PCBs with RoHS as an option.
Compare Low Cost Prototype with Standard Prototype and Production. Choose one which best suits your requirements.Compare now!
We can manufacture and assemble Single Sided/Layer (SS), Double Sided/Layer (DS-NPTH & DS-PTH) and MultiLayer (up to 32 layers) PCBs with RoHS as an option.
Need to know more about our capabilities?
What our customers say?
QualiEco Circuits Limited is an excellent supplier to us! We appreciate the quality of service and support that we receive from QualiEco Circuits. They always deliver what is promised
For printed circuit boards (PCBs) or PCB assembly you can count on. Talk to the friendly and experienced team at QualiEco Circuits, Australia.